Georgia DDS CDL General Knowledge Practice Test 9

  • Questions50
  • Correct to pass40
  • Passing score80%
  • Minimum age18 years

50 questions. Pick an answer to see if it is right and why; you need 40 correct answers to pass.

  1. 1. Two tires in a dual set have noticeably different diameters. Why is that a problem?

    Show answer

    Answer C: The larger tire carries more than its share of the load and can be overloaded

    The taller tire touches the road first and takes most of the weight, so it runs overloaded and hot while the smaller one does little work.

  2. 2. Why should a driver avoid stopping partway up a snow covered hill?

    Show answer

    Answer D: You may not get moving again and could slide backwards

    On a slippery grade the drive wheels may simply spin when you try to restart, leaving the vehicle stuck across the road or sliding back down it.

  3. 3. On packed snow, how much should a commercial driver reduce speed?

    Show answer

    Answer D: By about one half or more

    Packed snow costs far more traction than rain, so speed should be cut by half or more.

  4. 4. While you are driving, what should you do to catch a developing problem with the vehicle?

    Show answer

    Answer A: Check the gauges regularly and pay attention to unusual sounds, smells or vibrations

    Inspection continues during the trip: gauges, mirrors and your senses can reveal a problem long before a warning light does.

  5. 5. What does the driver check in the final step of the seven-step inspection?

    Show answer

    Answer A: Hydraulic brake leaks where those brakes are fitted, then the parking brake and the service brakes

    The last step is done with the engine started: test for hydraulic leaks on vehicles with hydraulic brakes, then prove that the parking brake holds and that the service brakes stop the vehicle.

  6. 6. At a rest area you find that the load has shifted although the straps still feel tight. What should you do?

    Show answer

    Answer C: Correct the load before driving on, since a shifted load is no longer secure

    Movement means the securement has already failed once, and a load that has shifted can shift again, so it is put right before the vehicle moves.

  7. 7. You drop your phone on the floor of the cab while driving. What do federal rules require?

    Show answer

    Answer A: Leave it, because reaching for it while driving is banned

    Federal rules forbid reaching for a mobile device in any way that takes the driver out of a seated, belted driving position.

  8. 8. What should you check about the fuel tank during the walkaround?

    Show answer

    Answer A: That it is securely mounted, the cap is on tight and there are no leaks

    A loose tank or a missing cap can spill fuel, and any fuel leak is a fire hazard that makes the vehicle unsafe to drive.

  9. 9. Why should the radiator cap never be removed while the engine is hot?

    Show answer

    Answer A: The cooling system is under pressure and scalding coolant can be sprayed out

    A hot cooling system holds pressurized coolant above its normal boiling point, so releasing the cap can throw boiling liquid and steam at whoever is holding it.

  10. 10. The paperwork shows a weight, but the load looks heavier than you expected. What should you do?

    Show answer

    Answer C: Weigh the vehicle, since you are the one answerable for driving it overweight

    The driver is the one who can be cited for an overweight vehicle, so a doubtful weight is settled on a scale before the trip continues.

  11. 11. Under the federal air brake standard, the low air pressure warning must come on before reservoir pressure drops below what level?

    Show answer

    Answer A: Before pressure falls below 60 psi

    Federal Motor Vehicle Safety Standard 121 requires the warning to operate while service reservoir pressure is still above 60 psi, which leaves enough air to bring the vehicle to a normal stop.

  12. 12. A tire may be regrooved only when what is true?

    Show answer

    Answer B: It carries a marking from the manufacturer showing that it is regroovable

    Only casings built with extra rubber under the tread and marked regroovable by the manufacturer may be cut, because others would be grooved into the belts.

  13. 13. Where on the road are you most likely to find ice in cold weather?

    Show answer

    Answer B: On bridges, overpasses and shaded stretches, which freeze before the rest of the road

    Bridges and overpasses lose heat from above and below, and shaded areas get no sun, so they ice over first and stay icy longest.

  14. 14. During the walkaround you notice one tire on an axle is a radial and the tire next to it is bias-ply. What should you do?

    Show answer

    Answer B: Treat it as a defect, because radial and bias-ply tires must not be mixed on the same axle

    Radial and bias-ply tires flex and grip differently, so mixing them on one axle makes the vehicle handle unpredictably and is not allowed.

  15. 15. Why should a large vehicle be accelerated smoothly and gradually?

    Show answer

    Answer A: Rough acceleration can damage the drivetrain and, on a combination, the coupling

    Jerky throttle inputs put shock loads through the driveline and the coupling, which causes mechanical damage over time.

  16. 16. How can a driver tell that a shipment includes hazardous materials?

    Show answer

    Answer B: The shipping paper describes them and the packages carry hazard warning labels

    Hazardous materials are identified on the shipping paper with their shipping name and hazard class, and the packages themselves carry labels showing the hazard.

  17. 17. How should a driver use brakes fitted with an antilock system during an emergency stop?

    Show answer

    Answer C: Brake as usual and keep enough pressure to stay in control while steering around the hazard

    The system only works when the brakes are applied hard enough for it to act, so the driver keeps pressure on and steers while the system prevents lockup.

  18. 18. Which parts of total stopping distance can a driver shorten simply by staying alert and looking far ahead?

    Show answer

    Answer B: Perception distance and reaction distance

    Alertness shortens the time spent recognizing a hazard and moving your foot to the pedal; braking distance depends on speed, weight, brakes and the road surface.

  19. 19. How often must every commercial motor vehicle receive a periodic inspection?

    Show answer

    Answer C: At least once every twelve months

    Federal rules require each commercial motor vehicle to pass a periodic inspection at least once in every twelve month period.

  20. 20. During a right turn in a tractor-trailer, what are you looking for in the right hand mirror?

    Show answer

    Answer B: Whether the trailer will clear the curb and whether anything has moved alongside you

    The right mirror is what tells you how close the trailer wheels are running to the curb and whether a vehicle or a cyclist has slipped into the space on your right.

  21. 21. Which brake lining condition must be reported?

    Show answer

    Answer C: Linings that are worn thin, loose, cracked or soaked with oil or grease

    Linings must have enough material left and must be securely attached and clean, because a thin, loose or contaminated lining cannot deliver its share of braking.

  22. 22. When should a lower gear be selected for a long downgrade?

    Show answer

    Answer D: Before you start down the hill

    The gear is chosen at the top, while speed is still low, because a heavy vehicle already rolling fast may not go into a lower gear at all.

  23. 23. What does the working load limit stamped on a chain or strap describe?

    Show answer

    Answer B: The maximum load the device is rated to hold in normal use

    The working load limit is the rated safe capacity for everyday use, deliberately set well below the force that would break the device.

  24. 24. A delivery van is stopped in the right lane ahead with its flashers on. What should you expect?

    Show answer

    Answer C: Someone may step into your lane from in front of it

    A stopped delivery vehicle hides the space in front of it, and that is exactly where a person carrying a package is likely to walk out.

  25. 25. What must be checked on a sliding fifth wheel during the inspection?

    Show answer

    Answer B: That it is locked in position and not so far forward that the trailer can hit the cab

    A slider that is unlocked can move under braking, and one set too far forward lets the trailer strike the cab when the tractor turns sharply.

  26. 26. You are pulling away from the curb after a delivery. Why is a mirror check needed first?

    Show answer

    Answer B: A cyclist or a vehicle may be coming up alongside you

    Traffic and cyclists can arrive alongside a parked vehicle at any moment, so the mirrors must be checked immediately before pulling out.

  27. 27. What tells you that an air suspension bag has a problem?

    Show answer

    Answer B: The bag is leaking or damaged, or the vehicle sits unevenly on that side

    An air bag that leaks or is cut lets that corner of the vehicle settle, which throws the load onto the other suspension parts and changes the ride height.

  28. 28. A tire has a cut deep enough to expose the body ply or the belt material. What does that mean?

    Show answer

    Answer D: The vehicle must not be driven on that tire

    Once the structural plies are exposed the casing has lost its strength, and federal rules treat that tire as unfit for the road.

  29. 29. During the walkaround you notice a bulge in the sidewall of a trailer tire. What does it indicate?

    Show answer

    Answer B: Damage inside the tire, which can lead to a sudden failure

    A bulge means the internal structure has broken and only the rubber is holding the air, so the tire can burst without warning.

  30. 30. A tire blows out at highway speed. What should the driver do first?

    Show answer

    Answer C: Hold the steering wheel firmly, stay off the brake and let the vehicle slow down

    Braking while a tire is gone can pull the vehicle out of line, so the driver keeps it straight and lets speed fall before easing off the road.

  31. 31. A driver hauling a sealed trailer that cannot be opened is still responsible for what?

    Show answer

    Answer D: Making sure the rig is not over the gross or axle weight limits

    A seal prevents inspecting the contents, but the driver must still confirm the vehicle is not overloaded.

  32. 32. Why should you never shift gears while crossing railroad tracks?

    Show answer

    Answer A: You could miss the gear or stall and be stuck on the tracks

    A stalled or coasting vehicle on the tracks has no way to clear quickly, so choose the gear before the crossing and do not shift until you are across.

  33. 33. On a scale, your loaded truck is well under the gross weight limit, but one axle is above the limit for that axle. What does this mean?

    Show answer

    Answer D: The vehicle is overloaded and the load must be shifted or reduced before you drive on

    Each axle and axle group has its own limit and each must be respected; being under the gross limit does not excuse an overloaded axle.

  34. 34. When should a driver add space beyond the basic following distance rule?

    Show answer

    Answer D: On slippery roads and whenever visibility is poor

    The seconds rule is a minimum for good conditions, so rain, snow, darkness and heavy traffic all call for more space than that.

  35. 35. You have backed into the same loading bay every week for a year. How often should you still get out and walk to the rear before backing?

    Show answer

    Answer D: Every time, since the area can change while you are away from it

    A familiar space is no guarantee; vehicles, pallets, people and overhead obstructions appear between one visit and the next, so you check on every occasion.

  36. 36. You want to check whether a tire on your truck is properly inflated. What is the correct method?

    Show answer

    Answer A: Measure the pressure with a tire gauge

    Only a tire gauge tells you the actual pressure; a tire can look and sound normal while being badly underinflated.

  37. 37. On a one way street or a divided highway, where are the warning devices placed?

    Show answer

    Answer B: About 10 feet, 100 feet and 200 feet back toward the approaching traffic

    When traffic can only come from one side, all three devices are spread out behind the vehicle to give approaching drivers a longer warning.

  38. 38. Which windshield condition should be reported during the inspection?

    Show answer

    Answer B: Cracks or dirt that get in the way of your view of the road

    The windshield must give a clear view; damage or grime in the driver line of sight is a safety defect.

  39. 39. At what time of day do drowsy driving crashes occur most often?

    Show answer

    Answer A: Between midnight and 6 a.m.

    The body clock makes people sleepiest in the early morning hours, which is when most fatigue-related crashes happen.

  40. 40. An unblocked article is 8 feet long and weighs 900 pounds. How many tiedowns does the federal rule require?

    Show answer

    Answer B: Two

    Only an article that is 5 feet or shorter and 1,100 pounds or lighter can be held with a single tiedown; anything longer than 5 feet needs at least two whatever it weighs.

  41. 41. You are backing a tractor-trailer in a straight line and the trailer starts to drift to the left. What is the standard correction?

    Show answer

    Answer D: Turn the top of the steering wheel a little to the left, toward the drift

    Small corrections made in the direction the trailer is drifting bring it back into line; large or opposite movements make the drift worse.

  42. 42. How does a driver keep a vehicle with a manual transmission from rolling back when starting on an upgrade?

    Show answer

    Answer D: Partly engage the clutch before the right foot leaves the brake, or hold the vehicle with the parking brake until the engine pulls

    Something has to hold the vehicle during the instant the foot moves from the brake to the accelerator, and that is either the clutch at its engagement point or the parking brake.

  43. 43. Why should the mirrors be checked repeatedly while you make a tight turn?

    Show answer

    Answer C: To watch the rear of the vehicle clear other vehicles and objects

    In a long vehicle the rear wheels cut inside the path of the front wheels, so only the mirrors show whether the rear is clearing curbs, poles and other vehicles.

  44. 44. When should the horn of a commercial vehicle be used?

    Show answer

    Answer C: Only when it is needed to avoid a crash

    An air horn is loud enough to startle other road users, so it is a warning device rather than a way to comment on other drivers.

  45. 45. What does it mean to overdrive your headlights at night?

    Show answer

    Answer D: Driving so fast that you cannot stop within the distance lit by your headlights

    You must be able to stop inside the distance you can see; at night that distance is limited by the headlights, so speed must be lowered to match.

  46. 46. What is checked in step six of the seven-step method?

    Show answer

    Answer D: The turn signals and the stop lights, checked from outside the vehicle

    Step six returns to the cab to switch on the signal and stop lamps, then checks each one from outside, because those lamps are not lit during the earlier light check.

  47. 47. How does bracing differ from blocking when securing cargo?

    Show answer

    Answer B: Bracing runs from the upper part of the cargo to the floor or walls to keep it from moving, while blocking fits snugly against the cargo

    Blocking is shaped to fit against the front, back or sides of a piece of cargo; bracing supports it from above so it cannot tip or shift.

  48. 48. Which components on a typical engine are driven by belts that must be checked for wear and tension?

    Show answer

    Answer D: The alternator, the water pump and, on many vehicles, the air compressor

    Belts drive accessories such as the alternator, the water pump and the air compressor, so one failed belt can take out charging, cooling or air supply.

  49. 49. You have chosen 40 miles per hour as your safe speed for a downgrade. How should the brakes be used?

    Show answer

    Answer A: Brake firmly to about 35, release, and repeat at 40

    Proper technique is firm application to about 5 miles per hour below the safe speed, then full release so the brakes cool before the next application.

  50. 50. How long must the record of a periodic inspection be kept?

    Show answer

    Answer A: Fourteen months

    The periodic inspection report is retained for fourteen months from the date of the report, which covers the full twelve month cycle plus a margin.